Customer Login

Guest
Register - Login
Pay securely by Visa, Mastercard, Amex or Paypal

shopping cart

Items:0 Checkout
Lemcol Polyurethane Wheels

Although no longer manufactured, RJ Cox can most likely find you an equivalent wheel of Castor. 

if you have the original Lemcol Wheel or castor that needs to be replaced, don't hesitate to contact our office to see what is available. 

Original Lemcol Listing below for Lemcol Polyurethane Wheels

Polyurethane wheels are the most versatile materials, from hospital trolleys to gantry cranes, and are suitable for most applications.

They have high tear strength, excellent abrasion resistance and a life span of several times longer than the equivalent in rubber under similar loads and conditions.

They also offer the advantages of low rolling resistance (meaning less worker fatigue), non-marking, good floor protection and excellent resistance to flat spotting when left for long periods under heavy load.

Under normal operating conditions, the effective temperature range for polyurethane is between-30 Degrees Celsius and +80 Degrees Celsius.

Polyurethane is also resistant to many oils, greases, brine, and industrial solvents. For reference, we have included a chemical resistance table in our technical data section.

Alternatives in hardness offer varying characteristics to suit a wide range of applications. For instance, hardness at a soft 80 shore A provides good shock absorbency and increased wear resistance compared to rubber, while our standard range of 95 shore A is the ideal balance between capacity and resilience. Where extremely low rolling resistance and high capacity is required, we offer a range of wheels in 70 shores D.

Most wheels used in Super, Extra Heavy and Heavy Industrial castors are moulded onto a cast iron centre that has been machined to a unique pattern. This design increases the bonding surface and reduces the possibility of the polyurethane delaminating under side load.

Where the wheel is used for high-speed towing above 16 kph or as a drive wheel, heat build-up may result in the polyurethane becoming brittle and subject to premature failure. Please contact your nearest Lemcol representative to confirm suitability under your conditions.

Load Capacities up to 6000kg

  • Suitable for most floors
  • Good wear resistance and high load capacity
  • Non-marking
  • Resists flat spotting when stationary
  • Normal operating temperature between -30 Degrees Celsius  and +80 Degrees Celsius
  • Resistant to a wide range of oils, greases, brine and most industrial solvents
  • Polyurethane hardness may be varied to suit the type of application
  • 12-month warranty

12 Month Warranty
This range carries our standard 12-month warranty against faulty workmanship and materials and is backed by a service and parts network Australia-wide.

Recommended Products

Would you like to know more?

If you'd like more information or if you have any enquiries about the Lemcol Polyurethane Wheels, please call +612 9457-2700 or fill in this form and we'll contact you.



* Required fields. Your privacy is assured.