Low-profile rubber Rumble Strips in Yellow and Black for use as a speed moderator are ideal for slowing the flow of vehicles in residential complexes.
Benefits of Rubber Rumble Strip and Lane Divider:
Specifications of Low Profile Rumble Strip:
Description: | Low Profile Rumble Strip |
Material: | Recycled Rubber |
Finish: | Black (RS500-B) or Yellow (RS500-Y) |
Length: | 500mm |
Width: | 100mm |
Height: | 15mm |
Installation: | Install using appropriate masonry fixings or glue using a suitable adhesive. |
Installation of Rumble Strips
In Bitumen:
First, check that there are no services in the immediate area, and position rumble strips fixed in place with 125mm x 6mm galvanised spikes (Not Supplied).
In Concrete:
The galvanised spikes will not be suitable on concrete and other hard surfaces. In this situation, a rawl plug and screw or sleeve anchor type fixing 6.5 x 40mm is recommended (Not supplied).
Tips:
If nailing into bitumen is difficult, it can be pilot-drilled with an under-size masonry drill. When installing Rumble Strips, adding a silicone or 2-part epoxy adhesive will help prevent the ends of the strips from moving.
For setting out: