Retractable Bollard for Vehicle Access and Parking Control

Retractable Bollards are designed for medium-security traffic and parking control, with a 90mm diameter construction, internal locking system and galvanised in-ground casing for reliable operation in commercial environments.

Features of Retractable Bollards:

• Simple, trouble-free operation has been proven over many years of installation.
• Hot-dip galvanised finish is available for durable corrosion protection.
• Hot-dip galvanised and safety yellow powder-coated finish is available with two reflective bands and an anti-slip top surface for increased visibility.
• Marine-grade 316 stainless steel is available for applications requiring a corrosion-resistant architectural finish.
• Stainless steel models omit reflective bands because they are designed primarily for architectural applications.
• Locks in both raised and lowered positions for controlled access and secure operation.
• Strong circular 90mm diameter design provides a robust physical barrier for traffic and parking control.
• Unique low-cost T-handle key operates the internal locking system.
• Galvanised in-ground casing provides durable below-ground support for the retractable bollard.
• Only two moving parts contribute to a simple, trouble-free operating design.
• Protected internal locking system is designed to resist tampering and fouling by dirt or water.
• Two keys are supplied per order, with additional keys available separately if required.

Retractable Bollard Models:

Operating Instructions:

1. Insert the key so the handle is facing outward on the short side of the cap.
2. With the key inserted, rotate clockwise to unlock the bollard.
3. Lower the bollard until it is fully retracted.

Important: The key must use the internal locking rod to lift the bollard. Failure to do so will prevent the bollard from locking correctly in the raised position.

Warning: Never allow the bollard to free-fall into the ground, as damage may result.

Specifications for Retractable Bollards:

In-Ground Casing Specifications:

Note: Retractable bollards are intended for medium-security applications such as traffic and parking control and should not be used where high-security locking is required, such as some car yards.

For higher-security applications, consider Cam-lok removable bollards.

The retractable bollard range is suited to commercial car parks, driveways, traffic management areas and controlled-access zones where a medium-security bollard needs to retract below ground when vehicle access is required.